Analisis Perancangan Alat Pemetik Buah Mangga (LATIKMA)

Authors

  • Husain Minaturrahim Universitas Al Azhar Indonesia
  • Muhammad Rayhan Afief Universitas Al Azhar Indonesia
  • Teuku Muhammad Firly Universitas Al Azhar Indonesia
  • Sofyan Maulana Universitas Al Azhar Indonesia
  • Vika Restianti Universitas Al Azhar Indonesia
  • Niken Parwati Universitas Al Azhar Indonesia

DOI:

https://doi.org/10.36722/sst.v7i1.804

Abstract

Product development is something that is needed by every existing company. At this time, almost all companies are competing to continue to develop their products to attract consumers to be able to run life easily and comfortably. In this study, we analyzed the design of the LATIKMA (Mango Fruit Picker) to make it easier for people to pick mangoes and have other goals so that the mangoes that were picked were not crushed. This study using 4 methods, namely RPW, MRPW, LCR, and J. Wagon. With a total time of 147 minutes and the total time of all work stations being the same for the RPW method, the number of stations is 10, the line efficiency is 74%, and the smoothing index is 22.56, then for the MRPW, the number of stations is 10, the line efficiency is 74%, and the smoothing index is 22.56, then for the J. Wagon the number of stations is 10, the line efficiency is 74%, and the smoothing index is 30.14, and for the LCR method, the number of stations is 9, the line efficiency is 82%, and the smoothing index is 13.22.

Keywords - Product, OPC, Assembly Chart, Heuristic, Prototyp

Author Biographies

  • Husain Minaturrahim, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi
  • Muhammad Rayhan Afief, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi
  • Teuku Muhammad Firly, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi
  • Sofyan Maulana, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi
  • Vika Restianti, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi
  • Niken Parwati, Universitas Al Azhar Indonesia
    Program studi Teknik Industri, Fakultas Sains dan Teknologi

References

T. Abdullah and F. Tantri, Manajemen Pemasaran, Jakarta: PT. Rajagrafindo Persada, 2012.

D. Sunyoto, Dasar-Dasar Manajemen Pemasaran, Yogyakarta: CAPS, 2013.

D. Kurniawan, "Pembuatan Kuesioner Standar untuk Menilai Standar Pelayanan Kefarmasian di Apotek," Universitas Muhammadiyah Purwokerto, Purwokerto, 2012.

M. Aldila, "Pengujian Usabilitas Dengan Metode Heuristic Evaluation Pada Sistem Event Universitas Islam Negeri Sunan Kalijaga," Universitas Islam Negeri Sunan Kalijaga , Yogyakarta, 2016.

Ziaulhaq, "Prototyping Model Proses," Universitas Ahmad Dahlan, Yogyakarta, 2012.

Maryana and S. Meutia, "Perbaikan Metode Kerja Pada Bagian Produksi dengan Menggunakan Man and Machine Chart," Universitas Malikussaleh, Aceh, 2015.

O. Wibisono, "Peningkatan Kapasitas Produksi pada UD. X," Universitasa Kristen Petra, Surabaya, 2016.

Rina, "Representasi Kecantikan Perempuan Dalam Iklan: Universitas Indra Prasta PGRI," 2015.

Downloads

Published

2022-02-07

Issue

Section

JURNAL AL-AZHAR INDONESIA SERI SAINS DAN TEKNOLOGI